1.00 mm Thick Flat Round Mineral Crystal (29.5 mm to 35.00 mm)
1.00 mm round mineral crystals can be fitted into a gasket or cemented directly into the seat of the bezel. This crystal is finished with a polishe...
View full details1.00 mm round mineral crystals can be fitted into a gasket or cemented directly into the seat of the bezel. This crystal is finished with a polishe...
View full details2.00 mm round mineral crystals can be fitted into a gasket. Can be cemented directly into the seat of the bezel but not recommended. This crystal i...
View full details1.00 mm round mineral crystals can be fitted into a gasket or cemented directly into the seat of the bezel. This crystal is finished with a polishe...
View full details2.00 mm round mineral crystals can be fitted into a gasket. Can be cemented directly into the seat of the bezel but not recommended. This crystal i...
View full detailsThese round plastic crystals have no step. These are high domed for watches needing clearance due to curved dials and higher cannon pinions and hou...
View full details2.00 mm round mineral crystals can be fitted into a gasket. Can be cemented directly into the seat of the bezel but not recommended. This crystal i...
View full details1.00 mm round mineral crystals can be fitted into a gasket or cemented directly into the seat of the bezel. This crystal is finished with a polishe...
View full details1.50 mm round mineral crystals can be fitted into a gasket or cemented directly into the seat of the bezel. This crystal is finished with a polishe...
View full detailsThis crystal is for open face (no lid or cover) pocket watch and timers and low-profile watches (with no step).
These "I" shaped gaskets are used when installing thin mineral or sapphire crystals into watch cases. Height of these Hytrel gaskets is 0.80 mm, wi...
View full detailsThese "I" shaped gaskets are used when installing thick mineral or sapphire crystals into watch cases. Height of these Hytrel gaskets is 1.20 mm, ...
View full details3.00 mm round mineral crystals can be fitted into a gasket. Can be cemented directly into the seat of the bezel but not recommended. This crystal i...
View full detailsThis crystal is for open face (no lid or cover) pocket watch and timers and low-profile watches (with no step).
2.00 mm round mineral crystals can be fitted into a gasket. Can be cemented directly into the seat of the bezel but not recommended. This crystal i...
View full detailsThese round plastic crystals have a “wedge edge” to hold the watch dial in place. WEC crystals are also used for watches that require the extra hei...
View full details2.50 mm round mineral crystals can be fitted into a gasket. Can be cemented directly into the seat of the bezel but not recommended. This crystal i...
View full details0.80 mm round mineral crystals can be fitted into a gasket or cemented directly into the seat of the bezel. This crystal is finished with a polishe...
View full details2.50 mm round mineral crystals can be fitted into a gasket. Can be cemented directly into the seat of the bezel but not recommended. This crystal i...
View full detailsThese "I" shaped gaskets are used when installing thin mineral or sapphire crystals into watch cases. Height of these Hytrel gaskets is 0.80 mm, wi...
View full detailsThese "L" shaped gaskets are used when installing thick mineral or sapphire crystals into watch cases, sizes available are as follows
These round plastic crystals have a step and a domed top. This type of crystal is used for watches with high cannon pinions and hour wheels, watche...
View full detailsThese round glass crystals are used in Hunting Case pocket watches (with cover). Very thin glass crystals (thickness approximately 0.30 mm)
0.80 mm round mineral crystals can be fitted into a gasket or cemented directly into the seat of the bezel. This crystal is finished with a polishe...
View full details1.50 mm round mineral crystals can be fitted into a gasket or cemented directly into the seat of the bezel. This crystal is finished with a polishe...
View full details1.00 mm round mineral crystals can be fitted into a gasket or cemented directly into the seat of the bezel. This crystal is finished with a polishe...
View full detailsDomed top and domed bottom – aka Double Domed – for watches with curved dials and/or with high pinions or sweep second hand. This crystal is finish...
View full details0.80 mm round mineral crystals can be fitted into a gasket or cemented directly into the seat of the bezel. This crystal is finished with a polishe...
View full details1.50 mm round mineral crystals can be fitted into a gasket or cemented directly into the seat of the bezel. This crystal is finished with a polishe...
View full detailsThese round plastic crystals are for open face pocket watches, timers and watches with a low profile. Identical to the PK crystals just larger diam...
View full detailsDomed top and domed bottom – aka Double Domed – for watches with curved dials and/or with high pinions or sweep second hand. This crystal is finish...
View full details1.50 mm round mineral crystals can be fitted into a gasket or cemented directly into the seat of the bezel. This crystal is finished with a polishe...
View full details2.00 mm round mineral crystals can be fitted into a gasket. Can be cemented directly into the seat of the bezel but not recommended. This crystal i...
View full details0.90 mm round mineral crystals can be fitted into a gasket or cemented directly into the seat of the bezel. This crystal is finished with a polishe...
View full detailsThese round plastic crystals have a “wedge edge” to hold the watch dial in place. WEC crystals are also used for watches that require the extra hei...
View full detailsPlastic domed crystal with a reflector ring. Crystal is supplied with a yellow or white ring (please specify colour required).
Domed top and flat bottom – aka Single Dome - approximate thickness at center is 3.00 mm. This crystal gives a domed look without the need for han...
View full detailsPlastic domed crystal with a reflector ring. Crystal is supplied with a yellow or white ring (please specify colour required).
These round plastic crystals have no step. These are high domed for watches needing clearance due to curved dials and higher cannon pinions and hou...
View full detailsThese round glass crystals are used in open faced antique pocket watches (no cover). Thickness varies depending on the diameter, top edge is beve...
View full detailsDomed top and flat bottom – aka Single Dome - approximate thickness at center is 3.00 mm. This crystal gives a domed look without the need for han...
View full detailsThese round glass crystals are used in Hunting Case pocket watches (with cover). Very thin glass crystals (thickness approximately 0.30 mm)
Domed top and domed bottom – aka Double Domed – for watches with curved dials and/or with high pinions or sweep second hand. This crystal is finish...
View full detailsDomed top and domed bottom – aka Double Domed – for watches with curved dials and/or with high pinions or sweep second hand. This crystal is finish...
View full detailsThese "I" shaped gaskets are used when installing thin mineral or sapphire crystals into watch cases. Height of these Hytrel gaskets is 0.80 mm, wi...
View full detailsThese round plastic crystals are very thin and used for Hunting Case type pocket watches. Crystals need to be thin to allow the cover (lid) to clos...
View full detailsThese round plastic crystals are very thin and used for Hunting Case type pocket watches. Crystals need to be thin to allow the cover (lid) to clos...
View full detailsThese round plastic crystals are for open face pocket watches, timers and watches with a low profile. Identical to the PK crystals just larger diam...
View full detailsDomed top and domed bottom – aka Double Domed – for watches with curved dials and/or with high pinions or sweep second hand. This crystal is finish...
View full details