Adapter to use Bergeon Reamers
Adapter to use Bergeon Reamers This adapter allows you to use Bergeon reamers in the KWM bushing tool. A cost effective way of using Bergeon reamer...
View full detailsAdapter to use Bergeon Reamers This adapter allows you to use Bergeon reamers in the KWM bushing tool. A cost effective way of using Bergeon reamer...
View full detailsAnvil I for KWM (Flume) a KWM equipment anvil #1 for KWM Universal Bushing Tool.
Anvil II for KWM (Flume) a KWM equipment anvil #2 for KWM Universal Bushing Tool.
Anvil III for KWM (Flume) a KWM equipment anvil #3 for KWM Universal Bushing Tool.
Anvil IV for KWM (Flume) a KWM equipment anvil #4 for KWM Universal Bushing Tool.
Anvil V for KWM (Flume) a KWM equipment anvil #5 for KWM Universal Bushing Tool.
Anvil VI for KWM (Flume) a KWM equipment anvil #6 for KWM Universal Bushing Tool.
Bergeon Adapter for KWM Bushing Tool all bronze bearings can now be pressed in with KWM. One device for two storage systems! It clamps reamers safe...
View full detailsBushing Tool Jig is a special jig which you slip between the escape wheel bridge and front plate for support while reaming and pushing a bushing. B...
View full detailsChamfering Cutter KWM (Flume) is a German engineered genuine KWM chamfering cutter used for removing residues left behind from the cutting process.
Chamfering Cutter made in USA American made used for removing residues left behind from the cutting process. This Chamfering Cutter is to be used w...
View full detailsClamp-on Bushing Tool for KWM is an economical clamp-on bushing tool to use with KWM reamers. This is not a KWM tool. This clamp-on bushing tool re...
View full detailsElectric Screwdriver Adapter for KWM made in USA American made to fit your electric screwdriver. This adapter is used with your electric screwdrive...
View full detailsInsert to use KWM Reamers This is an insert to hold KWM reamers. This insert is used in both the clamp on bushing tool 24-673 and the aluminium cla...
View full detailsKWM Bushing Tool Dust Cover for protecting the KWM Universal Bushing Tool. Made of a quality 0.18mm thick transparent foil. The hood is welded, sea...
View full detailsKWM Working Block the KWM press-fit tool can be screwed onto the KWM working block and thus used on every work station. The KWM Working Block inclu...
View full detailsPunches and Stump KWM (Flume) used for staking alarm clock staffs into the balance wheel. This set contains 1 pusher and 4 stumps.
Pusher 1.00 mm KWM (Flume) is a Replacement Pusher for the KWM Bushing Tool. The 1.0 mm Replacement Pusher (Driving Punch) should be slightly large...
View full detailsPusher 1.5 mm KWM (Flume) is a replacement pusher for the KWM Bushing Tool. The 1.5mm Replacement Pusher(Driving Punch) should be slightly larger t...
View full detailsPusher 10 mm KWM (Flume) is a replacement pusher for the KWM bushing tool. The 10 mm replacement pusher (driving punch) should be slightly larger t...
View full detailsPusher 2.5 mm KWM (Flume) is a replacement pusher for the KWM Bushing Tool. The 2.5 mm Replacement Pusher (Driving Punch) should be slightly larger...
View full detailsPusher 3.0 mm KWM (Flume) is a replacement pusher for the KWM Bushing Tool. The 3.0mm Replacement Pusher (Driving Punch) should be slightly larger ...
View full detailsPusher 7.1 mm KWM (Flume) is a replacement pusher for the KWM bushing tool. The 7.10 mm replacement pusher (driving punch) should be slightly large...
View full detailsPushers Set of 5 KWM (Flume) This is s set of 5 pushers to be used with the KWM bushing tool system. Set includes a total of 5 pushers from 1.00 mm...
View full detailsReamer 1.18 mm made in USA is a Replacement Reamer which is inserted into the Center Shaft of the KWM Bushing Tool. The American made US 1.18 mm Re...
View full detailsReamer 3.48 mm made in USA is a Replacement Reamer which is inserted into the Center Shaft of the KWM Bushing Tool. The American made US 3.48 mm Re...
View full detailsReamer 4.66 mm KWM (Flume) is a KWM Reamer which is inserted into the Center Shaft of the KWM Bushing Tool. The 4.66 mm KWM Reamer cuts into the pl...
View full detailsReamer 8.64 mm KWM (Flume) is a KWM reamer that is inserted into the center shaft of the KWM tool. The 8.64 mm KWM reamer cuts into the plate of th...
View full detailsWooden Block for Reamer Handle and Reamers This Wooden Block has one large hole, and 11 small holes to accept both American Made and German Made KW...
View full details